Installation guide
Installation accessories
General informations


Underlay materials, installation tools and adhesive mat and adhesives will help you to install floors perfectly. Profiles for prefinished floors and parquet will provide you to get a correct finish.

Underlay materials
Cork underlay for best improvement (approx. 17dB) and thermal insulation; no moisture barrier;suitable for radiant heating; thermal conductivity: 0,04 m² K/W; approx. 200 kg/m³ specific gravity; 25 m²/roll
Cork roll 2mm
Cardboard made of 100 % recycled paper combinded with special water-repellent paper; simple moisture protection; impact insulation approx. 19 dB; ideal for radiant heating (thermal conductivity: 0,05 m² K/W); 30 m²/roll  
Titacord Cardboard (2,5 mm)
PE-foam with an integrated moisture protection and selfadhesive sealing strips; tested for all relevant hazardous substances according to TOXPROOF-criterias; can be recycled at 100 %; 20 % improved impact sound; thermal conductivity: 0,045 m² K/W; 25 m²/roll  
tiloflex PE-foam (2,25 mm)
Moisture protection against humidity; no moisture barrier!; 4 x 6 m = 24 m²  
PE-Foil (0,2 mm)
installation tools
Special tapping block for glueless installation of hobo, tilolino und cork  
tiloFIX tapping block
1 set = 2 tiloFIX tapping blocks + 20 wedges for easy glueless installation of hobo, tilolino und cork  
tiloFIX installation set
Hardwood block for glueless installation of parkettFIX products  
parkettFIX tapping block
1 set = 1 parkettFIX tapping block+ 20 wedges for glueless installation of parkettFIX products  
parkettFIX installation set
adhesive mat

Energetically wet polyethylene foam with double-faced elastic adhesive surface and reinforcing tissue; for full spread gluing of prefabricated parquet floors with interlocking FIX-connection; sound-reduction of approx. 13 dB; suitable for underfloor heating (thermal conductivity: 0,038 m² K/W), CFD-free, thickness approx. 50 kg/m³, width 1m, 10 or 50 m / roll

tilo-elasto-fix adhesive mat (2 mm)
adhesion
PVAc glue for tongue & groove installation; free from solvents; resistant to normal humidity; 0,75 kg
tilo PVAc glue D3
Single-component glue for elastic gluing; solvent is silicon and isocyanate free; no primer is needed when gluing direct; includes toothed tool B5; 17 kg  
tilo Elastic EC1 hybrid adhesive
Synthetic resin adhesive with solvents for NATwood design parquet, inline design parquet, strip- and prefinished parquet on absorbent subfloors; consumption approx. 950 g per m²; 14 kg  
NATwood adhesive (synthetic resin)
Primer to prepare the subfloor before a full spread gluing with NATwood adhesive; consumption approx. 150 g per m²; 5 kg  
NATwood primer

Spatula B3,
Spatula B15,
Mother-Spatula

 
Spatula
Aluminium Profiles

colour: golden, silver
hight: 10,5 or 13,5 mm
length: 270 mm or 90 mm

 
Insert rail

colour: golden, silver
hight: 6-10 or 7-16 mm
length: length: 270 cm or 90 cm

Transition profile

colour: golden, silver
hight: 6-10 or 7-16 mm
length: 270 mm or 90 mm

 
End profile

colour: golden, silver
hight: 6-10 or 7-16 mm
length: 270 mm or 90 mm

 
Adaptor profile